Elation Platinum Seven handleiding
Handleiding
Je bekijkt pagina 29 van 32
29
ELATION PLATINUM SEVEN
E R R O R C O D E S
Error Codes subject to change without notice.
ERROR CODE
DESCRIPTION
PAN
The PAN movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit malfunctions
(sensor failed or magnet is missing) or there is a motor failure (defective motor or a
defective motor IC drive on the main PCB). This error may also be displayed if the
head/yoke was blocked during a reset function.
TILT
The TILT movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit malfunctions
(sensor failed or magnet is missing) or there is a motor failure (defective motor or
defective motor IC drive on main PCB). This error may also be displayed if the head was
blocked during a reset function.
ZOOM
The Zoom movement is not located in the default position after the reset.
This message will appear after the reset of the fixture reset if the magnetic-indexing
circuit malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure
(defective motor or defective motor IC drive on main PCB).
Fan Error
Head fan error, displayed as “Fan RPM <1000”
Bekijk gratis de handleiding van Elation Platinum Seven, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Platinum Seven |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4993 MB |
