Elation Platinum Seven handleiding
Handleiding
Je bekijkt pagina 19 van 32
19
EDIT PROGRAM – Record Controller – Working With Built In Programs
A primary unit can send up to 3 different data groups to the secondary units, i.e. a primary
unit can start 3 different secondary units, which run 3 different programs. The primary unit
sends the 3 program parts in a continuous loop.
The secondary unit receives data from the primary unit according to the group which the
secondary unit was assigned to. If e.g. a secondary unit is set to “Secondary 1” in the
menu “Set to Secondary”, the primary unit sends “Auto Program Part 1” to the
secondary unit. If set to “Secondary 2”, the secondary unit receives “Auto Program Part
2”.
To start an Auto Program proceed as follows:
1. Secondary Setting
• Select “Function Mode”.
• Press ENTER to confirm.
• Select “Set to Secondary”.
• Press ENTER to confirm.
• Select “Secondary 1”, “Secondary 2” or “Secondary 3”.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
2. Automatic Program Run
• Select “Function Mode”.
• Press ENTER to confirm.
• Select “Auto Program”.
• Press ENTER to confirm.
• Select “Primary” or “Alone”.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
Bekijk gratis de handleiding van Elation Platinum Seven, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Platinum Seven |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4993 MB |
