Elation Platinum Beam 5R Extreme handleiding

Verlichting

Elation

40 pagina's

PDF beschikbaar

Handleiding

ERROR CODES

When power is applied, the unit will automatically enter a “Reset/Test” mode. This mode

brings all the internal motors to a home position. If there is an internal problem with one or

more of the motors an error code will flash in the display in the form of “XXer” were as XX

will represent a function number. For example, when the display shows “0Er” it means

there is some type of error with the Pan motor. If there are multiple errors during the start-up

process they will all flash in the display. For example: if the fixtures has errors on Channel 1,

2, and 5 all at the same time, you will see the error message “01Er”, “02Er”, and ”05Er”

flash repeated 5 times.

If an error does occur during the initial start-up procedure the fixture will self-generate a

second reset signal and try to realign all the motors and correct the errors. If the error

persists after a second attempt a third attempt will be made. If after a third attempt all the

errors have not been corrected the fixture will make the following determinations:

•! 3 or More Errors - The fixture cannot function properly with three or more errors

therefore the fixture will place itself in a stand-by mode until subsequent repairs can be

made.

•! Less Than 3 Errors - The fixture has less than 3 errors; therefore most other functions

will work properly. The fixture will attempt to operate normally until the errors can be

correct by a technician. The errors in question will remain flashing in the display as a

reminder of internal errors.

PAN Er

Gobo Rot. 1 Er

TILT Er

Focus Er

Color Wheel Er

Gobo Wheel 1 Er

Bekijk gratis de handleiding van Elation Platinum Beam 5R Extreme, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.