Elation Platinum Beam 5R Extreme handleiding

Verlichting

Elation

40 pagina's

PDF beschikbaar

Handleiding

WDMX INTERNAL WIRELESS DMX RECEIVER SET UP

CLEARING EWDMX TRANSMITTER LINK

•! Access the “Wireless DMX” sub menu from the “PERSONALITY” menu, and then

select “Clear WDMX Memo” to clear any existing link between the fixture and a

EWDMX Transmitter. The Wireless indictor on the fixture will turn solid RED when the

link is severed.

•! You may also clear the link directly from the EWDMX Transmitter. First, be sure the

fixture(s) is powered ON, and then hold down the configuration button on the EWDMX

Transmitter for as least 5 seconds. This will automatically clear the link between the

EWDMX Transmitter and any fixture that is powered ON. All EWDMX indictors will

glow solid RED if the procedure was successful.

FIXTURE WIRELESS INDICATOR

RED/GREEN (Rapid Flashing) = Syncing to an EWDMX Transmitter.

RED/GREEN (Slow Flashing) = Paired with an EWDMX Transmitter but

not receiving a DMX signal from a controller.

GREEN (Solid) = Paired with an EWDMX Transmitter and receiving

DMX data.

RED (Solid) = Not paired with an EWDMX Transmitter (FREE).

Bekijk gratis de handleiding van Elation Platinum Beam 5R Extreme, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.