Elation Platinum Beam 5R Extreme handleiding

Verlichting

Elation

40 pagina's

PDF beschikbaar

Handleiding

EDIT PROGRAM – Record Controller – Working With Built In Programs

A Primary unit can send up to 3 different data groups to the Secondary units, i.e. a

Primary unit can start 3 different Secondary units, which run 3 different programs. The

Primary unit sends the 3 program parts in a continuous loop.

The Secondary unit receives data from the Primary unit according to the group which the

Secondary

unit was assigned to. If e.g. a Secondary unit is set to “Secondary 1” in the menu “Set

to Secondary”, the Primary unit sends “Auto Program Part 1” to the Secondary unit.

If set to “Secondary 2”, the Secondary unit receives “Auto Program Part 2”.

To start an Auto Program proceed as follows:

1. Secondary Setting

• S

elect “Function Mode”.

• Press ENTER to confirm.

• Select “Set to Secondary”.

• Press ENTER to confirm.

• Select “Secondary 1”, “Secondary 2” or “Secondary 3”.

• Press ENTER to confirm.

• Press MO

DE/ESC in order to return to the main menu.

2. Automatic Program Run

• Select “Function Mode”.

• Press ENTER to confirm.

• Select “Auto Program”.

• Press ENTER to confirm.

• Select “Primary” or “Alone”.

• Press ENTER to confirm.

• Press MODE/ESC in order to return to the main menu.

Bekijk gratis de handleiding van Elation Platinum Beam 5R Extreme, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.