Elation Platinum 1200 Wash handleiding
Handleiding
Je bekijkt pagina 19 van 38
19
www.elationlighting.com
EDIT PROGRAM – Record Controller – Working With Built In Programs
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master
unit can start 3 different Slave units, which run 3 different programs. The Master unit
sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the
Slave unit was assigned to. If e.g. a Slave unit is set to “Slave 1” in the menu “Set to
Slave”, the Master unit sends “Auto Program Part 1” to the Slave unit.
If set to “Slave 2”, the Slave unit receives “Auto Program Part 2”.
To start an Auto Program proceed as follows:
1. Slave Setting
U.=D=;L“Function Mode”.
U+J=KKENTER to confirm.
U.=D=;L“Set to Slave”.
U+J=KK ENTER to confirm.
U.elect “Slave 1”, “Slave 2” or “Slave 3”.
U+J=KKENTER to confirm.
U+J=KKMODE/ESC in order to return to the main menu.
2. Automatic Program Run
U.=D=;L“Function Mode”.
U+J=KKENTER to confirm.
U.=D=;L“Auto Program”.
U+J=KKENTER to confirm.
U.elect “Master” or “Alone”.
U+J=KKENTER to confirm.
U+J=KKMODE/ESC in order to return to the main menu.
Bekijk gratis de handleiding van Elation Platinum 1200 Wash, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Platinum 1200 Wash |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5213 MB |
