Elation Paragon M handleiding
Handleiding
Je bekijkt pagina 23 van 57
23
REMOTE DEVICE MANAGEMENT (RDM)
NOTE: In order for RDM to work properly, RDM enabled equipment must be used throughout
the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard
for lighting, and allows the DMX systems of the xtures to be modied and monitored remotely.
This protocol is ideal for instances in which a unit is installed in a location that is not easily
accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled
controller to send out a signal to devices on the wire, as well as allowing the xture to respond
(known as a GET command). The controller can then use its SET command to modify settings
that would typically have to be changed or viewed directly via the unit’s display screen,
including the DMX Address, DMX Channel Mode, and Temperature Sensors.
FIXTURE RDM INFORMATION:
Please be aware that not all RDM devices support all RDM features, and therefore it is
important to check beforehand to ensure that the equipment that you are considering includes
all of the features that you require.
The following parameters are accessible in RDM on this device:
Device ID Device Model ID RDM Code Personality ID
Open 0x77A 0x22A6 Standard (41Ch), Extended (64Ch)
CODE PARAMETER
0x0200 Sensor Denition
0x0201 Sensor Value
0x0080 Device Model Description
0x0081 Manufacturer Label
0x0082 Device Label
0x00E0 DMX Personality
0x00E1 DMX Personality Description
0x0400 Device Hours
0x0600 Pan Invert
0x0601 Tilt Invert
0x0500 Display Invert
Bekijk gratis de handleiding van Elation Paragon M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Paragon M |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 8635 MB |
