Elation Opto Branch 4 handleiding
Handleiding
Je bekijkt pagina 8 van 12
www.elationlighting.com
8 OPTO BRANCH 4™ User Manual
OVERVIEW
1. Power Switch - Turn device ON/OFF.
2. Link Out / Terminate Selector -
This switch is primarily used for
troubleshooting. When the switch is in the "Terminate" position, DMX output (4)
is disabled. When the switch is in the "Link Out" position, signal to output (4) is
enabled and additional devices can be linked.
3. DMX Input - These jacks are used to receive incoming DMX512 signal.
4. DMX Output -
These jacks are used to link out to standard DMX512 devices.
5. DMX Output / With Driver -
These jacks should be connected to DMX512
compatible fixtures or packs.
6. Fuse - F0.5A 250V 5x20mm (There are five total fuses, one main external and
four internal, one for each output.)
7. Power Input - AC 120V - 60Hz, 0.5A
Bekijk gratis de handleiding van Elation Opto Branch 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Opto Branch 4 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 1155 MB |
