Elation MIDIcon handleiding
Handleiding
Je bekijkt pagina 16 van 18
www.elationlighting.com
16 MIDIcon™ User Manual
LED CONTROL
The following messages can be sent to MIDIcon™ by the software to control the states of
the LEDs and displays.
The MIDIcon™ will control the LEDs and page displays on power up. As soon as any valid
LED control message is received, MIDIcon™ will defer all LED control to external software.
Playback Page Display – Continuous Controller 10 or Continuous Controller 12
If using continuous controller 10, the MIDI channel will set the page number 1-16,
If using continuous controller 12, the value byte will set the page number to 0-99.
Continuous controller 10 will also set the playback’s MIDI channel; continuous controller 12
will only change the display. Continuous controller 12 can only use MIDI channel 1.
Memory Page Display – Continuous Controller 11 or Continuous Controller 13
If using continuous controller 11, the MIDI channel will set the page number 1-16,
If using continuous controller 13, the value byte will set the page number to 0-99.
Continuous controller 11 will also set the playback’s MIDI channel; continuous controller 13
will only change the display. Continuous controller 13 can only use MIDI channel 1.
Blackout LED – Note 28 or 89
Note 28 will also set the blackout state flag, 89 will only set or clear the LED. Use MIDI channel 1.
Playback LEDs –
For playbacks 1 through 8; use notes 31, 34, 37, 40, 43, 46, 49, 52, these are the same as the
“C” row of buttons. Use MIDI channel 1.
Touchpad LEDs – Notes 1 through 12 (same notes as the pads).
Use MIDI channel 1.
Bekijk gratis de handleiding van Elation MIDIcon, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | MIDIcon |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2357 MB |
