Elation MIDIcon handleiding
Handleiding
Je bekijkt pagina 10 van 18
www.elationlighting.com
10 MIDIcon™ User Manual
DEVICE OPERATION
PLAYBACKS
The playback section was designed to take advantage of the playback features in the
Elation Lighting software programs. There are “A”, “B” and “C” buttons above each
playback fader. The function of each button will vary depending on the software that you
are using. The faders send standard 7-bit MIDI continuous controller messages; this gives the
faders a resolution of 128 steps. The playback buttons send MIDI note messages. Consult the
table at the end of this manual for the continuous controller and note numbers used.
The page controls in the upper left will allow you to select from 16 playback pages. The
controller
uses MIDI channels to page the playbacks. The page number shows the current
MIDI channel used by the playback faders and buttons. The controller has a page lock
feature that holds the MIDI channel on any active playback. When a playback fader is
above 0, the MIDI channel will hold for that particular playback regardless of a page
change until the fader is brought back to 0. This will keep the current cue locked to its
playback until it is released. The LED above each playback is lit when it’s playback fader is active.
SHORTCUT BUTTONS
These 6 buttons are for frequently used software functions.
Please refer to the MIDI table at the end of the manual for each button’s note assignment.
MEMORY BUTTONS
These 32 buttons can be used to call lighting effects, scenes or other memories.
The page controls next to these will select the MIDI channel for these buttons, giving you 16
pages of 32 buttons. Please refer to the MIDI table at the end of the manual for the note assignments.
DATA WHEELS
The data wheels send MIDI note on messages for increment and decrement. You can also
press down on the wheels. This gives you an additional button press and release. The wheels
are not paged and always use MIDI channel 1. Most of the time the wheels will match the
context of any active programming screen on your software program. They could also be
used to adjust channel values, color mixing, fade times, etc. Refer to your lighting software’s
manual for more specific way to use these.
TOUCHPADS
In the lower right are 12 touchpads. There is an LED above each touchpad that is lit
whenever a pad is touched. These can be used for momentary effects like bumps or even
scenes or chases that can be played like momentary effects. These are not paged and
always send MIDI note messages on MIDI channel 1.
Bekijk gratis de handleiding van Elation MIDIcon, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | MIDIcon |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2357 MB |
