Elation KL PAR IP COMPACT handleiding
Handleiding
Je bekijkt pagina 19 van 44
19
REMOTE DEVICE MANAGEMENT (RDM)
NOTE: In order for RDM to work properly, RDM enabled equipment must be used
throughout the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data
standard for lighting, allowing the DMX systems of the device to be managed, modified,
and monitored remotely (hence, remote device management). This protocol is ideal for
fixtures installed in locations that are not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM
enabled controller to send out a signal to devices on the wire, as well as allowing
the fixture to respond (known as a GET command). The controller can then use it’s
SET command to modify settings that would typically have to be changed or viewed
directly via the unit’s display screen, including the DMX Address, DMX Channel Mode,
and Temperature Sensors.
FIXTURE RDM INFORMATION:
Please be aware that not all RDM devices support all RDM features, and therefore it
is important to check beforehand to ensure that the equipment that you are considering
includes all of the features that you require.
The following parameters are accessible in RDM on this device:
RDM Code Device ID Device Model ID Personality ID
22A6 O206 4706
1ch, 4ch, 6ch, 10ch,
11ch, 19ch, 9ch, 15ch
CODE PARAMETER
0x0011 Proxied Device Count
0x0200 Sensor Denition
0x0201 Sensor Value
0x0080 Device Model Description
0x0081 Manufacturer Label
0x0082 Device Label
0x00E0 DMX Personality
0x00E1 DMX Personality Description
0x0400 Device Hours
0x0015 Comms Status
0x0031 Status ID Description
0x0032 Clear Status ID
0x0401 Lamp Hours
0x0402 Lamp Strikes
0x0403 Lamp State
CODE PARAMETER
0x0404 Lamp Mode
0x0405 Device Power Cycles
0x0603 Realtime Clock
0x1010 Power State
0x1031 Preset Playback
0x0122 Default Slot Value
0x00B0 Language
0x00A0 Language Capabilities
0x00C2 Boot Software Version Label
0x00C1 Boot Software Version ID
0x0070 Product Detail ID List
0x0030 Status Messages
0x1001 Reset Device
0x0090 Factory Defaults
0x0000 Undened PID
Bekijk gratis de handleiding van Elation KL PAR IP COMPACT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | KL PAR IP COMPACT |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5062 MB |
