Elation JOY 150 handleiding
Handleiding
Je bekijkt pagina 15 van 19
(V1.02) 15
5.3 Call on the Standalone Program
Engage the Send – Mode at the
J
J
O
O
Y
Y
-
-
1
1
5
5
0
0
.
.
The program starts automatically after turning on the unit. In the display you can see
the Next Time for the following step. At the last step the program will jump
automatically to the beginning of the program.
6 Change the Lamp
For a hassle free change of the Light bulb, it is absolutely necessary to follow all
descriptions in this chapter step by step.
6.1 Safety Rules
• Unplug AC power connection
• Allow to cool (min. 30 minutes)
• Don’t touch lamp with bare fingers.
• Install the lamp with the filler to the right direction.
• Distance between lamp and lens holder must be min. 5mm.
• Close the
J
J
O
O
Y
Y
-
-
1
1
5
5
0
0
before you connect the AC power!
6.2 How to change the lamp
Please see Figure 1-1.
1. Open the two screws at the top plate.
2. Take off the broken 150 CMD lamp and put in an new one.
3. Close the
J
J
O
O
Y
Y
-
-
1
1
5
5
0
0
in reverse order.
Attention:
Please make sure that you don’t touch the bulb of the lamp with bare fingers !!!
Table of Contents
Bekijk gratis de handleiding van Elation JOY 150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | JOY 150 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2538 MB |
