Elation Event Bar handleiding
Handleiding
Je bekijkt pagina 9 van 10
©Elation Professionals® - www.elationlighting.com - Event Bar Instruction Manual Page 17
Event Bar Cleaning
Event Bar Trouble Shooting
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
Fixture Cleaning: Due to fog residue, smoke, and dust cleaning
the internal and external optical lenses and mirror should be carried
out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates (I.e. smoke, fog
residue, dust, dew). In heavy club use we recommend cleaning on a
monthly basis. Periodic cleaning will ensure longevity, and crisp out-
put.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
Event Bar Fuse Replacement
First unplug the power. Locate and remove the unit’s power cord.
Once the cord has been removed located the fuse holder located
inside the power socket. Insert a flat-head screw driver into the
power socket and gently pry out the fuse holder. Remove the bad
fuse and replace with a new one. The fuse holder has a built-in sock-
et for a spare fuse be sure not to confuse the spare fuse with active
fuse.
©Elation Professionals® - www.elationlighting.com - Event Bar Instruction Manual Page 18
The Event Bar is fully operational in three different mounting posi-
tions, hanging upside-down from a ceiling, hanging sideways on
trussing, or set on a at level surface. The unit should be mounted
using a mounting clamp (not provided), afxing it to the mounting
bracket that is provided with the unit. Always ensure that the unit is
rmly xed to avoid vibration and slipping while operating. Always
ensure that the structure to which you are attaching the unit is secure
and is able to support a weight of 10 times the unit’s weight. Also,
always use a safety cable that can hold 12 times the weight of the
unit when installing the xture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people’s grasp.
Event Bar Installation
Event Bar Power Cord Daisy Chain
With this feature you can connect the xtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 4 xtures maximum. After 4 xtures you will need
to use a new power outlet. They must be the same xtures. DO
NOT mix xtures.
The Event Bar comes with a standard 6 degree lens already
attached. Included in the box is an optional 12 degree lens. To
switch lenses simply remove the retainer ring in front of the cur-
rent lens, carefully remove the lens, and attach the 12 degree
lens. Replace the retainer ring and the switch is complete.
Event Bar Changing Lenses
Bekijk gratis de handleiding van Elation Event Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Event Bar |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 1883 MB |
