Elation E-FLY handleiding
Handleiding
Je bekijkt pagina 12 van 18
www.elationlighting.com
12 E-FLY™ User Manual ver 1
OPERATION [continued]
POWER SAVE
Press and hold the Power Save button for 3 seconds to toggle between the indicator
displays ON/OFF. The indicator displays will flash 2 or 3 times confirm each change.
When set to ON, the displays will remain illuminated in any situation.
When set to OFF, the illumination brightness of the displays will decrease after 5
seconds and turn OFF after 10 seconds of no device operation.
E - FLY™ SIGNAL INDICATOR
The E-FLY™ Signal Indicator will display the current wireless DMX signal strength being
received. The more bars the indicator displays, the stronger the wireless DMX signal
is. Signal strength may vary depending on the location of the E-FLY™ device and the
fixture it is connected to, and the visible line of sight between them.
The first bar on the E-FLY™ signal strength indicator will flash SLOWLY when the
E-FLY™ device is transmitting a DMX signal.
The first bar on the E-FLY™ signal strength indicator will flash QUCIKLY when the
E-FLY™ device is NOT receiving a DMX signal.
E - FLY™ ADDRESS CHANNEL
The E-FLY™ device address can be set to (15) different channels (0-14) by switching
the corresponding E-FLY™ Address Dip Switch. (See chart below)
E-FLY CHANNEL
0 1 2 3 4 5 6 7
DIP SWITCHES ON None 1 2 1, 2 3 1, 3 2, 3 1, 2, 3
E-FLY CHANNEL
8 9 10 11 12 13 14
DIP SWITCHES ON 4 1, 4 2, 4 1, 2, 4 3, 4 1, 3, 4 2, 3, 4
Bekijk gratis de handleiding van Elation E-FLY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | E-FLY |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 1679 MB |
