Elation DR-PRO RACK handleiding
Handleiding
Je bekijkt pagina 6 van 9
Operation Guide
2.1)When the Work Mode option menu appears,
password "1234"(the default password was set as "1234"), the function option menu appears.
use Up/Down button to select "SET & MODIFY", press OK and input
1)Select Work Mode
2.2)Record/modification of DMX data.
2)Set User Parameters
There are 5 work modes available for DMX Recorder Pro Rack:
1)Manual control
2)Real-time trigger
3)Time code trigger
4)External DMX trigger
5)DMX monitor
The user may press the OK Button and keep hold it for 2 seconds, the Work Mode option menus appears, now use
Up/Down button to select the work mode, and press OK to confirm.
2.2.1)Record DMX
The user may use this function to record SCENE and SHOW, use the recorded SCENE to edit CHASE.
2.2.2)Record a SCENE
To choose and access Record SCENE function, use function button to modify SCENENAME. Select Confirmation &
Record, press OK to record the current inputed DMX data. The LED indicator will flash 3 times. After finish, to select
"Finish & Return" to return.
2.2.3)Record a SHOW
To choose and access Record SHOW function, use function button to modify SHOWNAME. There are 4 record methods
for user choice: Manual, Auto,Semi-Auto and Smart.
2.2.4)Add a Chase(The user may use this recorder to edit Chase only if the Scene had been recorded in it.)
2.2.4.1)Select Add Chase to edit Chase.
2.2.4.2)Use function button to modify CHASENAME.
2.2.4.3)In "STEP: xxx/yyy", the specified step may be modified.
xxx: the current step
yyy: the recorded total steps of this Chase, up to 200 steps can be recorded.
2.2.4.4)Select the Scene of Step in "SceneName xxx/yyy".
xxx: the current Scene
yyy: the total Scenes available for option
2.2.4.5)Modify the time parameters of the current step in "HoldTime/FadeYime".
2.2.3.1)Manual
Press Start button to start record, and then press Stop button to finish.
2.2.3.2)Auto
Once the recorder received at least a frame which all DMX data are "zero", the recorder is assumed to be in the
state of ready to record, when received any “nonzero" DMX data, start to record, when received all "zero" DMX
data again, record completed.
2.2.3.3)Semi Auto
The theory is the same as the Auto mode. The difference is that in Semi Auto mode, need to press "Stop" to finish
record. Or, when received all "zero" DMX data, record completed.
2.2.3.4)Smart
This mode is applied to those DMX data which were played in a circle with changes, and the DMX data frame
must be the totally same in the circle playback.
2.2.3.5)Select "Confirm & Record" to access Record control state.
Select "Start Record" to record. The recorder will handle the record in terms of the selected record method. If want
to finish record in advance, you can select" Stop & Return".
2.2.4.6)After the current parameters setting completed, select "Confirm & Save" to record the current step parameter.
2.2.4.7)Select " Finish & Return" to return.
-5-
Bekijk gratis de handleiding van Elation DR-PRO RACK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | DR-PRO RACK |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 814 MB |
