Elation DMX Solo 256 handleiding
Handleiding
Je bekijkt pagina 13 van 28
2.3 Recording Chases2.1.3 Preview a Scene
2. Operation Guide2. Operation Guide
9 10
SCENE 1-40
4. Tap one of 1-40 buttons that holds the scene you
want, the LED near this button will flash indicating
a preview of the scene is proceeding.
2.2 Playback a Scene
SCENE
K
1. Apply power on, tap Scene button causing its LED
to light or flash.
The LED is lit indicating the scenes will be recalled
instantly. The LED flashes indicating the scenes will
be recalled to fade in or fade out.
2. Use UP/DOWN button to select the bank.
SCENE 1-40
3. Tap one of 1-40 buttons that holds the scene you
wish to playback, the LED near this button is lit indicating
this operation.
4. Tap the button again to go back.
2.3.1 Record Scenes into a Chase
CHASE
1. Apply power on, tap Chase button causing its LED to
light or flash, the Segment Display shows "ST00".
St00
RECORD
CHAS
2. Press and hold down Record button for 3 seconds,
the Record LED will flash indicating recording is
active, the Segment Display reads "CHAS", and the
recorded chases will be indicated by the lit LED's near
1-40 buttons.
CHASE
St00
3. Tap one of 1-40 buttons to select a chase, its LED l
flashes, the Segment Display shows "ST00" or " ST01".
"ST00" refers to the chase is empty, and "ST01" refer
to the chase contains scenes and the current scene
(the first step) is playing.
SCENE
K
4. Tap Scene button, these three LED's of Scene, Chase
and Record will flash in unison, the Segment Display
shows "bk01" and the scenes recorded in the bank is
indicated by the lit LED's.
Bekijk gratis de handleiding van Elation DMX Solo 256, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | DMX Solo 256 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2136 MB |
