Elation Design Wash LED Zoom handleiding
Handleiding
Je bekijkt pagina 23 van 40
www.elationlighting.com
23!!!!!!!!!!DESIGN WASH LED ZOOM™ User Manual ver 1
PERSONALITY - Status Settings - Address Via DMX
When ON, define the desired DMX address via an external controller.
1. Connect the fixture to the external controller and power ON.
2. Set the DMX value of Channel 1 on the controller to (7).
3. Set the DMX value of Channel 2 on the controller to (7) or (8).
When set to (7), the DMX address can be set between (1) and (255).
When set to (8), the DMX address can be set between (256) and (511).
4. Using Channel 3 on the controller set the desired DMX address of the fixture.
Example 1:
If the desired DMX address is 57, set Channel 1 to a value of (7), set Channel 2
to a value of (7), and then set Channel 3 to a value of (57).
Example 2:
If the desired DMX address is 420, set Channel 1 to a value of (7), set Channel
2 to a value of (8), and then set Channel 3 to a value of (164). (256+164=420)
5. After setting Channel 3 to the desired DMX address value, wait for
approximately 20 seconds for the fixture to complete the address reset
function.
PERSONALITY - Status Settings - No DMX Status
Fixture runs in Auto Run if NO DMX signal is detected. Options include
(Hold/Close Shutter/Music Control/Auto Program), default is Hold.
1. Press MENU to access the main menu, press UP/DOWN until Personality is
displayed and press ENTER.
2. Press UP/DOWN until Status Settings is displayed and press ENTER.
3. Press UP/DOWN until No DMX Status is displayed and press ENTER.
4. Press UP/DOWN to select desired mode (=Hold, =Close Shutter, =Music
Control, =Auto Program) and press ENTER to confirm selection, and press
MENU to return to the previous menu.
PERSONALITY - Status Settings - Pan Reverse
Reverse the PAN movement, default is OFF.
1. Press MENU to access the main menu, press UP/DOWN until Personality is
displayed and press ENTER.
2. Press UP/DOWN until Status Settings is displayed and press ENTER.
3. Press UP/DOWN until Pan Reverse is displayed and press ENTER.
4. Press UP/DOWN to select desired mode (=ON, =OFF) and press ENTER to
confirm selection, and press MENU to return to the previous menu.
Bekijk gratis de handleiding van Elation Design Wash LED Zoom, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Design Wash LED Zoom |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5590 MB |
