Elation Design Wash LED 60 handleiding
Handleiding
Je bekijkt pagina 10 van 48
Design Wash LED 60™
©Elation Professional, Los Angeles Ca. 10 www.ElationLighting.com
1. LED Assembly – 60 Philips Rebel LEDs comprise the LED assembly. 22 Red, 17
Green, 15 Blue, and 6 White.
2. Yoke Assembly – This assembly consist of the electronics and motors that control the
tilt movement as well as the LED operation.
3. Base Assembly – The base assembly holds and protects all the relative electronics.
Avoid bruit force to base as this may seriously effect the operation of this fixture.
4. Carrying Handle – Please use this intergraded handled to move the fixture form
location to location. Never carry the fixture by the head.
5. LCD Menu Display - 4-segment menu display. Used to display the DMX address as
well as all other menu functions.
6. Menu Button - This button is used to access the menu functions.
7. Up Button – The up button is used to toggle forward through the menu functions and
settings.
8. Down Button – The down button is used to toggle backwards through the menu
functions and settings.
9. Enter Button – The enter button is used to enter in to a certain menu function or to lock
a function into memory.
10. Control Board Assembly – The control board assembly consist of the LCD menu
display, the menu function buttons.
11. Cooling /Fan Assembly – The back of the head consist of the fan and cooling fin
assembly. To prevent the fixture from overheating, never block the back of the head
during normal operation.
Bekijk gratis de handleiding van Elation Design Wash LED 60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Design Wash LED 60 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4751 MB |
