Elation Design Spot 250 Pro handleiding
Handleiding
Je bekijkt pagina 32 van 56
Design Spot 250 Pro™
©Elation Professional® 32 Design Spot 250 Pro™
the market for easier operation.
8.7.2 Edit User mode – This function allows the user to make the actual changes in the
user-defined modes that are created in the previous function.
8.8 EDIT PROGRAM: - The fixture comes equipped with a built-in DMX recorder that allows
custom programs to be installed and recalled directly from the fixture’s control board.
Programs can be created and stored using the fixture’s control board or by using an
external DMX controller. For detailed instructions on how to complete this task please
see Section 11/ Page 35.
8.8.1 Select program – This function allows the user to select one of ten of the user
defined built-in programs. This program is then accessed in “Function Mode”
under “Program Run.”
8.8.2 Edit program – This function allows the user to edit the built-in programs.
8.8.3 Edit Scenes – This function allows the user to edit or define the actual scenes
that are stored in the user defined built-in programs that are accessed in the
previous step.
8.8.4 Rec Controller - The Design Spot 250 Pro™ features an integrated DMX
recorder. Pre-programmed scenes can be transmitted to the fixture via any DMX
compliant controller. This function allows those scenes to be stored in to the
fixture’s built-in memory and then subsequently used to create the user defined
programs.
Bekijk gratis de handleiding van Elation Design Spot 250 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Design Spot 250 Pro |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5733 MB |
