Elation Design Promo DMXAC handleiding
Handleiding
Je bekijkt pagina 13 van 36
Design Promo DMXAC™
©Elation Professional® 13 Design Promo DMXAC™
data signal is being received or not. If DMX data signal is being received, the display will
show "A.XXX" (XXX representing the actual DMX address). If the fixture is not receiving a
DMX signal the display will flash "A.XXX" (XXX representing the actual DMX address).
If your fixture is connected to a DMX controller and the display is flashing (not receiving a
DMX signal), please check the following:
- The 3 PIN XLR plug (cable with DMX signal from controller) is not connected or is
not inserted completely into the DMX input jack.
- The DMX controller is switched off or defective.
- The DMX cable or connector is defective.
- A DMX terminator has been inserted into the last fixture in your DMX chain.
Bekijk gratis de handleiding van Elation Design Promo DMXAC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Design Promo DMXAC |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3016 MB |
