Elation DESIGN PROMO 360 handleiding
Handleiding
Je bekijkt pagina 5 van 16
device’s weight.
Connect the fixture to the mains with the power plug.
Installation method via clamp
Please refer to the picture below:
(1)Omega-holders
(2) Clamp
(3) Safety-rope
(4)Quick-lock fastener
Screw one clamp each via a M12 screw and nut onto the Omega holders.
Insert the quick-lock fasteners of the first Omega holder into the respective holes on the bottom of
the device. Tighten the quick-lock fasteners fully clockwise. Install the second Omega holder.
Pull the safety-rope through the holes on the bottom of the base and over the trussing system or a
safe fixation spot. Insert the end in the carabine and tighten the safety screw.
DMX-512 control connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other
side to the male 3-pin XLR input of the ad lighting. You can chain multiple ad lighting together
through serial linking. The cable needed should be two core,
screened cable with XLR input and output
connectors. Please refer to the diagram below.
DMX-512 connection with DMX terminator
- ４ - XM080-V1.0 NR
Bekijk gratis de handleiding van Elation DESIGN PROMO 360, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | DESIGN PROMO 360 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2349 MB |
