Elation Design LED 36MH handleiding
Handleiding
Je bekijkt pagina 20 van 46
Design LED 36MH™
©Elation Professional® 20
Design LED 36MH™
ALON Runs fixture as a single unit for
Stand-Alone operation.
ALL ON/OFF Resets all motors and returns fixture
to the home position.
3 RESE
SCAN ON/OFF Resets only the pan and tilt motors.
LIFE 0000~9999 Displays the total fixture running time.
LAMP 0000~9999 Displays a lamps running time.
4 TIME
CLMP ON/OFF Clear lamp running time.
5 RPAN ON/OFF Reverses the pan movements.
6 RTLT ON/OFF Reverses the tilt movements.
7 FINE ON/OFF Changes modes between 16 bit and
8 bit operation.
VALU D–XX D-00 (DXXX) LED display will detail the DMX value
of each channel during normal
operation.
D ON ON/OFF Turns off LED display after 2 minutes
of non-use
8 DISP
FLIP ON/OFF This function will reverse the LED
display by 180˚ for hanging operation.
RDMX ON/OFF Allows a user to change the DMX
address remotely from a DMX
console.
SPOT ON/OFF Lamp optimization.
DFSE ON/OFF Resets all the fixture functions to
factory settings.
FEED ON/OFF Pan and tilt feedback (error
correction) on/off
9 SPEC
VER V1.0~V9.9 Displays the fixture’s current software
version
STEP
S–01 ~S–48
Sets the amount of steps in
the user program.
C–01
~
C-12
0 1 XX (00~FFH)
~
12 XX (00~FFH)
Edit each of the channel
settings (values) for the
selected scene.
TIME T – XX (01~FFH)
Adjust the hold time of
each scene in the user
program.
SCXX
CEDT
ON/OFF
Allows the programmer to
edit the user program via
any external DMX
controller.
10 EDIT
RUN ON/OFF Program test
Bekijk gratis de handleiding van Elation Design LED 36MH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Design LED 36MH |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4500 MB |
