Elation Design LED 36MH handleiding
Handleiding
Je bekijkt pagina 10 van 46
Design LED 36MH™
©Elation Professional® 10
Design LED 36MH™
the fixture’s menu system.
6) ENTER BUTTON – This button is used to select and confirm a menu function.
7) HEAD FAN ASSEMBLY – This fan is used to cool the internal temperature of the head
assembly.
8) BASE ASSEMBLY – The main base holds the majority of the electronics and logic
boards. The base also provides a means to securely mount the fixture to the floor or
ceiling.
9) DMX INPUT JACK – This 3-pin XLR jack is receives an incoming DMX signal from a
DMX controller.
10) DMX OUTPUT JACK – This 3-pin XLR jack sends a DMX signal to another DMX
fixture. For best results this jack should be terminated if it is the last fixture in a DMX
daisy chain (see DMX termination on page XX).
11) POWER CONNECTION – This cable provides main power to your fixture. Always be
sure to use a properly grounded power cable. If this cable ever becomes frayed or
damaged this cable should be replaced immediately by a qualified technician.
12) FUSE HOLDER – This housing holds a 2A/250v GMA fuse and is designed to protect
the electronics in the event of severer power fluctuations. Never defeat this fuse. In
the event of fuse failure, always be sure to replace with an exact match fuse unless
other wise specified by an authorized Elation Professional technician.
13) POWER SWITCH – This switch controls main power to the unit (if I have to tell you
that, you probably should not be using this fixture!).
14) TRANSPORT HANDLE – This fixture contains a build-in carrying handle be sure to
always transport this fixture by the handle and never by grasping the head or yoke
assembly.
15) OMEGA CLAMP – This system allows a quick and efficient means to secure a clamp
to the unit. To attach a clamp to the unit, attach a clamp that is rated to handle the
weight of the unit to your omega clamp. After a clamp has been attached to the omega
clamp, attach the cam locks to the designated position on the bottom of your unit.
Lock the cam locks into position by turning the wing nuts 90°.
16) SAFETY CABLE RIGGING POINT –The fixture provides a built-in rigging point for a
safety cable on the underside of the fixture, be sure to use this point and never secure
a safety cable to a carrying handle.
Bekijk gratis de handleiding van Elation Design LED 36MH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Design LED 36MH |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4500 MB |
