Elation DESIGN LED 12 BRICK II handleiding

Verlichting

Elation

32 pagina's

PDF beschikbaar

Handleiding

Design LED 12 Brick II ™

©Elation Professional, Los Angeles Ca. 20 www.ElationLighting.com

FADE XXX Adjust speed of fade

STRB XXX Adjust speed of strobe

SPED XXX

djust speed of scene

FADE XXX

djust speed of fade

CHS7

STRB XXX

djust speed of fade

SPED XXX

djust speed of scene

FADE XXX

djust speed of fade

CHS8

STRB XXX

djust speed of fade

MAST Sound-controlled run as Master CTRL

ALON Sound-controlled run in Stand Alone

SOND

MIC M-XX Microphone sensitivity

<DIMR> MOD1 Select standard dimmer

MOD2 Select weak dimmer

<LOAD> yes

Reset to Fixture to the Factory Default

Settings

OTHR

<VER> V X.X Show the version

Remark:

1) If there is no DMX data received in the device, the display will flash.

2) Instruction for the SPED and the FADE function in CHAS:

SPEED: The time one step would stay

FADE: The time that one step altered to next step

Example: we set SPEED ==1second, and FADE ==1second, the 1st step is Red 100% open,

the 2nd step is green 100% open, the 3rd step is Blue 100% open. So, the Chase would

come out as:

1, The Red 100% open and stay for 1second (SPEED)

2, Then Red drop down from 100% to 0%, the same time Green from 0% to 100%, in

1second (FADE)

3, The Green stay 100% for 1second

4, Then Green drop down from 100% to 0%, the same time Blue from 0% to 100%, in

1second (FADE)

5, Blue stay 100% for 1 second.

6, Then Blue drop down from 100% to 0%, the Red come up from 0% to 100%

Repetition operation

Bekijk gratis de handleiding van Elation DESIGN LED 12 BRICK II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.