Elation Color Tone 50 handleiding
Handleiding
Je bekijkt pagina 24 van 44
Color Tone 50™
©Elation Professional® 24 Color Tone 50™
Controller Settings: (assuming the fixture is addressed at 001)
1. Set the DMX value of channel 1 to a value of 7.
2. Set the DMX value of channel 2 to a value of 7 or 8. When channel 2 is
set to "7" you can adjust the starting address between 1 and 255. When
set to "8" you can adjust the starting address between 256 and 511.
3. Use channel 3 to set your desired DMX starting address. For example: If
you want to set the starting address to 57, set channel 1 to a value of “7,”
set channel 2 to a value of “7” and use channel 3 to set your address to
57 by selecting a channel value of 57. Example 2: If you want to set the
starting address to 420, set channel 1 to a value of “7,” channel 2 to "8"
and channel 3 to "164" (256+164=420).
4. The above example assumes the fixture is addressed at 001, for any
other address follow the above instruction for the actual staring address
in place of 1. . For example: If you want to set the starting address to 57,
when the starting address is set at 163. Set channel 163 to a value of “7,”
set channel 164 to a value of “7” and use channel 165 to set your address
to 57 by selecting a channel value of 57.
5. Wait for approximately 20 seconds for the unit to complete the
address reset function.
Bekijk gratis de handleiding van Elation Color Tone 50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Color Tone 50 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3937 MB |
