EKO K430FVD handleiding
Handleiding
Je bekijkt pagina 36 van 324
36
SETTING - CONNECTION
Network Configuration
You set the TV network by selecting Configuration and press the button to enter the
submenu.
Automatically obtain an IP address
1. If you connect to the wired network, the TV will automatically obtain an IP address and
connect to the network.
2. If the connection fails, disconnected message will display for the Ethernet status. Retry or
enter the IP settings, and select Manual to input the information again.
Manually enter the IP address
1. Enter the IP settings to select Manual.
2. Enter the IP Address, Netmask, Gateway, DNS Server 1 and DNS Server 2 in the menu.
Note:
• This section is only for 4K models.
• You get access to the Internet through your TV.
• The default option of IP Settings Mode is DHCP.
HDMI & CEC
You can use your TV remote to control the external devices that are connected to
the TV by HDMI cable. The external devices need to support HDMI & CEC Function
(HDMI-CEC).
1. Set HDMI Control to On.
2. Connect an HDMI-CEC-compliant device to the TV.
3. Turn on the connected external device. The device is automatically connected to the TV.
4. After connection is finished, you can access the menu of the connected device
on your TV screen using your TV remote and control the device.
Note:
• HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.
• The HDMI CEC feature of the connected device must be turned on.
• If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC
control features do not work.
• Depending on the connected HDMI device, the HDMI-CEC Control feature may
not work.
Bekijk gratis de handleiding van EKO K430FVD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EKO |
| Model | K430FVD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 44667 MB |
