Ekko ES80E handleiding
Handleiding
Je bekijkt pagina 50 van 65
Maintenance
48
5. Choose a point on the machine; i.e.,
contact patch of a tire, as a visual
reference for use when crossing the test
line.
6. Move the control handle to drive at the
maximum speed, and release handle
while across the ground test line.
7. Measure the distance between the
reference point and the test line.
⊙ Result: The machine should stop within a
specified the braking distance.
¤ Result: The machine do not stop within a
specified the braking distance.
Note: The brakes must be able to hold the
machine on any slope it is able to climb.
8. Replace the brake, repeat the process
from step1.
B-8
Test the Drive Speed-Platform
Stowed
This procedure should be performed every
250 hours or quarterly, whichever comes first.
Proper drive functions are essential to safe
machine operation. The drive function should
respond quickly and smoothly to operator
control. Drive performance should also be free
of hesitation, jerking
and unusual noise over
the entire proportionally
controlled speed
range.
Perform this
procedure with the
machine on a firm,
level surface that is free
of obstructions.
1. Create start and
finish lines by marking two lines on the ground
40 feet/12.2 m apart.
2. Turn the key switch to platform control
and pull out the red Emergency Stop button to
the on position at both the ground and
platform controls.
3. Lower the platform to the stowed position.
4. Press the drive function select button
a. Drive function select button
5. Choose a point on the machine; i.e.,
contact patch of a tire, as a visual reference
for use when crossing the test line.
6. Move the control handle to drive at the
maximum speed. Begin timing when the
reference points crosses the start line.
7. Continue at full speed and note the time
when your reference point on the machine
passes the finish line. Refer to specification.
B-9
Test the Drive Speed-Platform Raised
This procedure should be performed every
250 hours or quarterly, whichever comes first.
Proper drive functions are essential to safe
machine operation. The drive function should
respond quickly and smoothly to operator
control. Drive performance should also be free
of hesitation, jerking and unusual noise over
the entire proportionally controlled speed
range.
Perform this procedure with the machine on a
firm, level surface that is free of obstructions.
1. Create start and finish lines by marking
two lines on the ground 40 feet/12.2 m apart.
2. Turn the key switch to platform control
and pull out the red Emergency Stop button to
the on position at both the ground and
platform controls.
3. Press the platform up button.
Braking distance
Max braking distance
40cm±20cm
Bekijk gratis de handleiding van Ekko ES80E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | ES80E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8709 MB |
