Ekko ES60E handleiding
Handleiding
Je bekijkt pagina 10 van 65
Personal Safety Work Area Safety
8
Personal Fall Protection
Personal fall protection equipment (PFPE) is
not required when operating this machine. If
PFPE is required by job site or employer
rules, the following shall apply:
All PFPE must comply with applicable
governmental regulations and must be
inspected and used in accordance with the
manufacturer’s instructions.
Electrocution Hazards
This machine is not electrically insulated and
will not provide protection from contact with or
proximity to electrical current.
Obey all local and governmental regulations
regarding required clearance from electrical
power lines. At a minimum, the required
clearance contained in the chart below must
be followed.
Line Voltage
Required Clearance
0 to 300V
Don’t touch
300V to 50KV
120 Inch
50KV to 200KV
181 Inch
200KV to 350KV
240 Inch
350KV to 500KV
300 Inch
500KV to 750KV
420 Inch
750KV to 1000KV
540 Inch
Allow for platform movement, electrical line
sway or sag, and beware of strong or gusty
winds.
Keep away from the machine if it contacts
energized power lines. Personnel on the
ground or in the platform must not touch or
operate the machine until energized power
lines are shut off.
Do not operate the machine during lightning or
storms.
Do not use the machine as a ground for
welding
Bekijk gratis de handleiding van Ekko ES60E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | ES60E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8709 MB |
