Ekko ES40E handleiding
Handleiding
Je bekijkt pagina 33 van 65
Transporting And Lifting Instructions
31
Observe and obey:
√ While using a crane lifting machine, keep
the normal judgment and planned to
control the movement of the machine.
√ The transport vehicle must be parked on a
level surface.
√ The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
√ Be sure the vehicle capacity, loading
surfaces and chains or straps are sufficient
to withstand the machine weight. lifts
are very heavy relative to their size. See
the serial label for the machine weight.
√ The machine must be on a level surface or
secured before releasing the brakes.
√ Do not allow the rails to fall when the snap
pins are removed. Maintain a firm grasp on
the rails when the rails are lowered.
√ Do not drive the machine on a slope that
exceeds the uphill, downhill or side slope
rating. See Driving on a Slope in the
Operating Instructions section.
√ If the slope of the transport vehicle bed
exceeds the maximum slope rating, the
machine must be loaded and unloaded
using a winch as described in the brake
release operation.
Brake release operation
For hydraulic drive products of ES40E,60,
ES80E, ES100E, ES120E.
1. Chock the wheels to prevent the machine
from rolling.
2. Be sure the winch line is properly secured
to the drive chassis tie points and the
path is clear of all obstructions.
3. Push in the black brake release knob to
open the brake valve.
4. Pump the red brake release pump knob.
Bekijk gratis de handleiding van Ekko ES40E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | ES40E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8709 MB |
