Ekko ES120E handleiding
Handleiding
Je bekijkt pagina 34 van 65
Transporting And Lifting Instructions
32
Securing to truck or
trailer for transit
Always use the extension deck lock when the
machine is transported.
Fixed on the chassis in the transport plane
through fastening parts of machine.
Use a minimum of 4 chain or straps.
Use the chain or straps ample load capacity.
Turn the key switch to the off position and
remove the key before transporting.
Inspect the entire machine for loose or
unsecured items.
If the guardrails had be folded down, use the
straps to fix before transport.
Observe and obey:
ā Only qualified forklift operators should lift the
machine with a forklift.
ā Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See the serial label for
the machine weight.
Lifting the Machine with a
Forklift
Be sure the extension deck, controls and
component trays are secure. Remove all loose
items on the machine.
Fully lower the platform. The platform must
remain lowered during all loading and
transport procedures.
Use the forklift pockets located on both sides
of the ladder.
Position the forklift forks in position with the
forklift pockets.
Drive forward to the full extent of the forks.
Raise the machine 0.15 m and then tilt the
forks back slightly to keep the machine
secure.
Be sure the machine is level when lowering
the forks.
Lifting the machine from the
side can result in component damage.
Bekijk gratis de handleiding van Ekko ES120E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | ES120E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8709 MB |
