Ekko ER15L handleiding
Handleiding
Je bekijkt pagina 25 van 31
20
11.Trouble shooting
⚫ If the car is still in trouble ,please follow the instruction in chapter 8
Table6 Fault analysis
Fault
cause
Processing method
Cargo can’t lift up
Cargo overweight
Only lift up the max Load shown
on the nameplate
Battery discharge
Battery recharge
Lifting fuse failed
Check and replace the lifting fuse
Hydraulic oil level is too low
Check and fill the hydraulic oil
Oil leak
Check the sealing of the tubing or
cylinder
Sensor failure
Check the sensor on the mast
Oil leakage due to
inhalation
High oil quality
Reduce oil quality
Stacker can’t operate
The battery is charging
Finished charging then up plug
the power plug from the power
source
Battery not connected
Connect battery properly
The fuse failed
Check and replace the fuse
Battery discharge
Battery recharge
The emergency stop switch is activated
Insert and pull the knob to close
emergency stop switch function
The handle is in the operating area
firstly Move the handle to the
braking area
A direction moving
Accelerator and connector damage
Check accelerator and connector
Move slowly
Battery discharge
Check the battery status on the
display
The electromagnetic brake has been
activated
Check The electromagnetic brake
Related handle harness unconnected
or damaged
Check the handle harness and
connector
Bekijk gratis de handleiding van Ekko ER15L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | ER15L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4589 MB |
