Ekko ER15L handleiding
Handleiding
Je bekijkt pagina 21 van 31
16
Figure12：Battery discharge
display
9.2Battery display
The discharge condition is indicated by 10 red LED display segments. The rightmost LED will
only illuminate when the battery is properly charged. As the state of charge of the battery drops,
the LED lights illuminate in sequence, but only one light at a time.
⚫ The second LED on the left flashes, indicating “energy reserve” (70% discharge depth)
⚫ The leftmost 2 LED flash alternately, indicating “power is empty” (80% of the depth of
discharge)
9.3Charging
⚫ Only be charged with included charger
⚫ Before using the charger ,please fully understand the contents of the
charger manual
⚫ Ensure good ventilation in charging room
⚫ Fully Charged situation can only be viewed from the display.to check this
situation ,you need to interrupt the charging and start the car.
Park the car in a safe area that provide dedicated power .Lower fork and remove the cargo.
Turnoff the power of car, Open the battery cover, then connect the connector and Charger.
The charger starts charging .Finishing charging .Remove the connector from the charger,
Connect the connector to the car and cover the battery cover .
10.Maintain Introduction
⚫ Only Qualified and trained personnel are allowed to maintain the car .
⚫ Remove the cargo from the fork and lower the fork to the lowest point
before maintenance .
⚫ Please use the designated binding equipment or lifting equipment in
accordance with chapter 4 if it is necessary to lift the car .Before
！
！
Battery
discharge
Battery fully charged
Bekijk gratis de handleiding van Ekko ER15L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | ER15L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4589 MB |
