Ekko EP25E handleiding
Handleiding
Je bekijkt pagina 22 van 23
- 22 -
- 22 -
5、Repair Manual
5.1 Fault Diagnosis
Fault
Cause
Processing method
The vehicle can't
move
The battery connector is not connected
Check the battery connector，connected
if necessary
Electric lock switch on “0”
Electric lock switch turn right
Emergency Stop Switch not open
Open the Emergency stop switch
Battery power runs out
Check the battery charge，If it is
necessary to recharge
The truck being charge
Interrupt charging process
The fuse is damaged
Check the fuse
The goods cannot
ascend
The truck no running
According to the "vehicle can not
move" listed in the fault processing
method of operation
Less hydraulic oil
Check the hydraulic oil
The fuse is damaged
Check the fuse
Over weight
Note the load capacity
the micro switch of lifting contact is not
good or damaged
Check the fuse
The goods can't drop
The dirty oil blocking control valve
Check the hydraulic oil and cleaning
control valve, and if necessary change,
the hydraulic oil.
Lowering solenoid valve no open or
damaged
Check the lowering solenoid valve or
change
Can't stop rising
Lifting micro switch damaged
Cut the power，change lifting micro
switch
A direction moving
Micro switch and cable jumper contact
is not good
Check the micro switch and connect
jumper witch on the control handle
Bekijk gratis de handleiding van Ekko EP25E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EP25E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2931 MB |
