Ekko EP20E handleiding
Handleiding
Je bekijkt pagina 6 van 23
- 6 -
- 6 -
turn signals that makes the truck turn
around.
2.2.3 Operating system
1. Hoisting and falling button
2. Driving switch
3. Belly switch
4. Horn button
2.2.4 Braking system
Braking performance depends on road conditions and vehicle load conditions.
The brake function can be activated by the following ways：
⚫ Turn the travel switch (2) to "0" position or release the switch to make truck
brake until it stops.
⚫ Move driving switch (2) directly from a driving directions to the opposite
direction, truck regenerative braking until it began in the opposite direction.
⚫ Move the handle up and down to the braking area（‘B’），truck braking.
If the handle is released, it will automatically move to the braking area (" B
") ,and the truck brakes until it stops.
Belly switch (3) is set for preventing the operator squeezed. When the truck
is driven towards (' Fw) and encounters an obstacle, and driver's body
touches belly switch ,the truck will slow down or drive to （‘Bw’） for a
distance and then stop. If the handle is in operation area but the truck is not
driving, please consider if it still work.
Bekijk gratis de handleiding van Ekko EP20E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EP20E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2994 MB |
