Ekko EP20E handleiding
Handleiding
Je bekijkt pagina 23 van 23
- 23 -
- 23 -
If above steps still cannot solve problems, please contact after-sales service
department of the manufacturer and have the problems solved by specially
trained technicians.
5.2 Preparation before repair
To prevent possible accidents during maintenance and repair work, following
preparations must be done:
— Park the stacker safely.
— Press the emergency stop switch and disconnect the connectors on accumulator.
5.3Check hydraulic oil level
— Get the stacker ready for maintenance or repairing.
— Open the cover of electric unit.
— Check hydraulic oil level in oil tank.
Check the hydraulic oil level only after the fork and main frame are lowered to their
lowest position.
5.4 Use Preparation after maintenance or repairing
Use the stacker only after following operations have been completed.
— Clean the stacker.
— Check the brake.
— Check the emergency stop switch.
— Check the horn.
This manual final interpretation retained by manufacturers.
The truck move
slowing
Battery power shortage or homologous
cable jumper contact is not good
Check the battery power led and
homologous cable jumper contact.
The car suddenly
started
Controller is damaged.
Change the controller
The handle which control the forward
or back is no reset.
Repair or change
Bekijk gratis de handleiding van Ekko EP20E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EP20E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2994 MB |
