Ekko EK07S handleiding
Handleiding
Je bekijkt pagina 6 van 22
- 5 -
The brake function can be activated by the following way：
① Move the Fahrschalter(3)to position‘0’,The vehicle brake until it stops.
② Move the Fahrschalter directly(3) to the opposite direction, vehicle
regenerative braking until it began in the opposite direction.
③ Vehicle braking, if the handle is moved up and down to the braking area
(" B "). If the release handle, the handle automatically move to the braking area
(" B ") vehicle brake until it stops.
④ Belly switch (4) Can prevent the operator will be squeezed, if the button
to activate, behind the vehicle to slow down or start to (' Bw) driven a short
distance, then stop. If the handle is in operation area and vehicles is not driving,
please consider this button to throw this situation.
2.2.5 Operating system
The stacker main job agencies for goods fork, rely on pallet fork on the tray
or cargo loading and unloading, stacking and short-distance transport operations.
Pallet fork installed in sliding shelves, carriage moved up and down inside
the door frame, by driving chain or moving the whole frame to make goods out
of the ground or piled up on the arrival of the goods shelf. The working of driving
chain and moving whole inner frame is by lifting the oil cylinder telescopic to
active. Stacking process is implemented by the control operation of oil cylinder
telescopic.
Cylinder expansion by the operating lever control to achieve, by pumping
station provides pressure oil. In the lifting oil cylinder of the loop equipped with
safety relief valve, control the speed of slowing down the door frame, to achieve
the effect of security lapses.
2.3 Electrical principle
2.3.1 Electrical principle
Piling car electrical system includes walking and job control, etc. The
stacker be equipped with communication electronic assembly CURTIS1212
which from America. The instrument has the functions including with battery
indicator, working time display and voltage protection. When the battery power
is too low, electricity meter will cut off the oil pump motor start control circuit,
stacking the car can only walk cannot ascend fork, tip should be charging
immediately.
Oil pump motor is 5 minutes a week of dc motor, so the oil pump motor is
Bekijk gratis de handleiding van Ekko EK07S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EK07S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2446 MB |
