Ekko EK07S handleiding
Handleiding
Je bekijkt pagina 15 van 22
- 14 -
stability or safe operation of the vehicle, must obtain prior written approval from
origin manufacturers or its successor. After vehicle manufacturer check and
approve the changes, nameplates, labels and markings of Operation and
Maintenance Manual must be modified as well.
4、Maintenance and Service Manual
4.1 Repair and maintenance of safety procedures
Maintenance technician: The maintenance and service should only be
performed by special personnel trained by the manufacturer. After the technician
sent by after-sales department of the manufacturer completed maintenance and
servicing work, they should sign on the service log.
Cleaning Operation: Flammable liquid cannot be used for cleaning the stacker.
Before cleaning, take safety precautions to prevent electric sparks (e.g. sparks
caused by short circuit). When operating the accumulator, connectors on it must
be disconnected. Use soft air suction or compressed air, non-conductive and anti-
static brushes to clean electric and electronic components.
Operation of Electric System: Operation on the electric system should only
be performed by specially trained personnel. Before performing any operation
on the electric system, precautions must be made to prevent electric shock. When
operating the accumulator, connectors on it must be disconnected.
Installation: When repairing or replacing hydraulic components, electric and
electronic components, make sure to install them back to their original positions.
Wheels: Quality of the wheels has significant effect on stability and driving
performance of the stacker. Modification on wheels can be performed only with
the approval from the manufacturer. When replacing wheels, ensure that the
stacker is levelled as delivery state(wheels must be replaced in pairs, i.e. replace
right wheel together with left one).
Lifting chain and rollers: Chain and rollers will be worn quickly without
good lubrication. Perform periodic lubrication according to following
maintenance table. Shorten the lubrication period under adverse operation
conditions (such as in dusty and hot environment).
Hydraulic oil pipe: The oil pipe must be changed every 6 years. When change
the hydraulic assembled parts, the oil pipe should be also changed.
Bekijk gratis de handleiding van Ekko EK07S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EK07S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2446 MB |
