Ekko EB20E handleiding
Handleiding
Je bekijkt pagina 17 van 25
16
9.4Maintenance, Recharging and Replacement of the accumulator
The truck must be parked in a safe location before any operation on the accumulator.
9.4.1 Maintenance Technician
Brake
1.1
Check the air gap of the electromagnetic brake
●
Electric
system
2.1
Check the function of operation switch, display equipment
and component
●
2.2
Check alarm systems and safety devices
●
2.3
Check the cable for damage. Whether the terminal is firm.
●
2.4
Check the function of micro switch setting
●
2.5
Check the controller and the EPS controller
●
2.6
Cable and motor fixation
Cable and motor fixation
●
Power
3.1
Check battery
●
3.2
Check the charging connector for battery
●
3.3
Check whether the connection of the battery cable is tight,
and smear the electrode with grease if necessary
●
Driving
system
4.1
Check the gearbox for noise
●
4.2
Check the driving mechanism and grease, check the reset
function of the operating handle
●
4.3
Check the drive wheels and bearing wheel for wear and
damage
●
4.4
Check wheel bearings and fixtures
●
Massive
structure
5.1
Check the frame for damage
●
5.2
Check the label for completeness
●
5.3
Check the fixation status of lifting mast
●
The
hydraulic
system
6.1
Check the hydraulic system function
●
6.2
Check that hoses, pipes, and joints are tight and that seals
are not damaged
●
6.3
Check cylinder and piston for damage, seal and fixation
●
6.4
Check load chain Settings and re-tighten if necessary
●
6.5
Visually inspect mast roller and inspect roller surface for
wear
●
6.6
Inspect cargo fork and load parts for wear
●
6.7
Check oil level
●
6.8
Renewed hydraulic oil
●
Bekijk gratis de handleiding van Ekko EB20E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EB20E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3725 MB |
