Handleiding
Je bekijkt pagina 24 van 45
24
Chapter 3 Touch Screen Properties
●
Touch Form
The touch data mode of the selected touch panel driver can be congured according to the operating
system you are using. Congure this if you select Touch.mfd in “Conguration File” (page 33).
Attention
• You must reboot the computer after changing the mode.
Touch Data Mode
Setting Description
Serial Mode Select this mode if you are using Windows 8.1 or an earlier operating system.
Hybrid Mode (default setting) Select this mode if you are using Windows 10 or a later operating system.
●
Lift-o Delay
Default setting: Disabled
Available range: Disable / 10 ms to 100 ms (10 ms units)
The timing at which the system is notied of the user removing their nger can be delayed. The
system is notied of the user removing their nger the specied length of time after the nger is
removed from the panel surface. Increasing the length of the notication time allows the system to
ignore the user’s instantaneous failure to maintain contact with the panel surface.
●
Touch Enabled
Default setting: Not enabled (Touch enabled)
You can disable touch input by checking “Disable”.
Bekijk gratis de handleiding van Eizo DuraVision FDX1004T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision FDX1004T |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4238 MB |
