Handleiding
Je bekijkt pagina 16 van 45
16
Chapter 2 Setup
2-6. Calibrating the Touch Panel Monitor
Calibrate the touch panel monitor to align the touched positions with the positions at which the cursor is
displayed in response to each touch.
1.
In “Basic Setting” - “Device Select”, select the touch panel monitor on which
positions are to be calibrated.
2.
Click “4Point” or “9Point” in the “Software Setting” tab.
The calibration window will appear.
3.
Touch the center of the marker displayed in the window.
Tap the each cross on the screen as it appeared in order to input
a calibration sample.
If you want to stop inputting a calibration sample,
press the ESC button.
Do you change the display orientation until calibration is completed.
Touching the marker causes the next marker to appear. Touch the center of the new marker.
When all the markers are touched, the calibration is completed. The conrmation window will appear.
4.
Click “OK”.
The position calibration is completed at this point.
Bekijk gratis de handleiding van Eizo DuraVision FDX1004T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision FDX1004T |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4238 MB |
