Einhell TC-VC 3055 A handleiding

135 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 135
GB
- 14 -
5.2 Fitting the lters
Important!
Never use the wet/dry vac without a lter.
Always make sure that the lters are securely
seated!
Fitting the foam lter (Fig. 7)
For wet vacuuming, slip the supplied foam lter
(16) over the lter basket (Fig. 2/4). The pleated
lter (15) already tted upon delivery is not suita-
ble for wet vacuuming.
Fitting the pleated lter (Fig. 8)
For dry vacuuming, slip the pleated lter (Fig. 15)
over the lter basket (Fig. 2/4). The pleated lter
(15) is suitable for dry vacuuming only.
Fitting the dirt bag (Fig. 9)
For vacuuming ne dry dirt it is recommended
that you also t the dirt bag (19). This will ensure
that the pleated lter (15) does not clog up so
quickly and help maintain the vacuuming power.
It also makes it easier to dispose of the dust. Slip
the dirt bag over the vacuuming hole. The dirt bag
is suitable for dry vacuuming only.
5.3 Fitting the suction hose (Fig. 10-13)
Connect the suction hose (11) to the correspon-
ding connector on the wet/dry vac, depending on
the application required.
Vacuuming
Connect the suction hose (11) to the suction hose
connector (9).
Blowing
Connect the suction hose (11) to the blow con-
nector (10).
To extend the suction hose (11), the elements
which make up the multi-part suction tube (12)
can be attached to the suction hose (11).
5.4 Suction nozzles
Combination nozzle (Fig. 13)
The combination nozzle (13) is for vacuuming so-
lids and liquids over medium to large areas.
Crevice nozzle (Fig. 12)
The crevice nozzle (18) is designed for vacu-
uming solids and liquids in corners, edges and
other areas that are di cult to access.
6. Operation
6.1 On/O switch (Fig. 2/2)
Switch position 0: O
Switch position I: Normal mode
Switch position AUTO: Automatic mode
6.2 Dry vacuuming
For dry-vacuuming, use the pleated lter (15). In
addition, you can also t the dirt bag. (See point
5.2)
Always make sure that the lters are securely
seated!
6.3 Wet vacuuming
For wet vacuuming, use the foam lter (16) (see
point 5.2).
Check that the lter is securely seated at all times.
Water drain screw (Fig. 1)
To make the tank (8) easier to empty after wet va-
cuuming, it is tted with a water drain screw (25).
Open the water drain screw (25) by turning it anti-
clockwise and drain the liquid.
When wet vacuuming, the oating safety switch
(5) closes when the maximum tank level is
reached. At the same time, the suction noise of
the equipment will change and become louder.
You must then switch o the equipment and em-
pty the tank.
Danger!
The wet/dry vac is not suitable for the vacuuming
of combustible liquids. For wet vacuuming, use
only the supplied foam lter.
6.4 Automatic mode
Connect the power cable of your electric tool to
the automatic socket-outlet (21) and connect the
suction hose (11) to the vacuuming connector of
your electric tool. Check that the connections are
secure and air-tight.
Set the switch (2) on the wet/dry vac to position
AUTO “(automatic mode). The moment you
switch on the electric tool, the wet/dry vac will
switch on as well. When you switch o the electric
tool, the wet/dry vac will switch o as well after a
pre-set delay.
6.5 Blowing
Connect the suction hose (11) to the blow con-
nector (10) on the wet/dry vac.
Anl_TC-VC_3055_A_SPK13.indb 14Anl_TC-VC_3055_A_SPK13.indb 14 20.01.2025 09:48:0820.01.2025 09:48:08

Bekijk gratis de handleiding van Einhell TC-VC 3055 A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEinhell
ModelTC-VC 3055 A
CategorieStofzuiger
TaalNederlands
Grootte17356 MB