Einhell HC 10 D handleiding
Handleiding
Je bekijkt pagina 10 van 46
Connection for fine atomizers
(thermal)
When using a thermal evaporator (all bioactive
sauna heaters), Nhum has to be connected to N
oven and Lhum to WB (water bath) in the oven.
Important! The terminal WM (water shortage) is not
assigned!
.
.
.
.
.
.
.
Operation and functions
Description of the operating elements
No.1 Operating switch
No.2 Control factor regulator
No.3 Operating status indicator
No.4 Button for temporary operation
Operating display indicators
LED Indicator Function
color lights up
Green X Control system ready
Red X Evaporator working
No indication 6 hours safety cut-out
Important:
For safety reasons, the controller switches off
operation after a period of 6 hours. Resetting is only
possible with the operating switch.
To activate the humidity controller you have to turn
the switch (1) to „ON“. The required humidity can be
set from 10 - 100% with the rotary regulator (2).
Note: The actual humidity in the cabin depends on
the size and density of the sauna cabin and therefore
has to be determined by experiment.
Fast-select button (4)
This function serves to prevent oversaturation with
scented essences during a sauna
session. To get full enjoyment from scented
essences we recommend
activating the short-run button „K“ before entering the
sauna (approx. 15 minutes ON time).
Important!
Use only those fragrances and scented essences
stipulated by the
manufacturer.
Important safety information:
Mis-use may harm your health!
Be sure to observe the doses stipulated!
10
5
GB
HC 10_D_mehrp_neu 13.01.2006 10:00 Uhr Seite 10
Bekijk gratis de handleiding van Einhell HC 10 D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Einhell |
| Model | HC 10 D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4862 MB |
