Einhell GE-ST 36/40 Li E BL handleiding
Handleiding
Je bekijkt pagina 12 van 42
EN
- 12 -
3. Intended use
This machine is designed solely for private use
in clearing away freshly fallen loose snow (wet
and powdery) from paved paths and areas (e.g.
courtyards, garage driveways, footpaths or
parking spaces).
The paths and areas to be cleared must have a
fi rm base and a smooth surface (e.g. concrete
paving, granite paving or asphalt).
The machine is not designed for the
following:
•
Clearing away snow from unpaved paths and
areas (e.g. graveled areas or meadows).
•
Clearing away snow in large quantities
and heights, clearing away very wet snow,
clearing away packed snow and ice.
•
For commercial use (e.g. in public parks, in
sports facilities) and for use in agriculture and
forestry.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
4. Technical data
Motor power supply: .............. 36V (2x 18V)
Idling speed: .............................. 1670-1970 RPM
Clearing Width ................................................16"
Clearing Depth ..............................................7.9"
Ejection Distance ......................................19.6 ft.
Weight (Tool only): ...................................14.1 lbs
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
Limit the operating time.
All stages of the operating cycle must be
considered (for example, times in which the
electric tools are switched off and times in which
the tool is switched on but operates without load).
5. Before starting the equipment
Warning!
Always remove the battery/batteries before
making adjustments to the equipment.
5.1 Fitting the long handle (Fig. 3 - 6)
1. Plug the bottom long handle (Item 10) into
the top long handle (Item 5). Take care not to
damage the cable inside.
2. Insert the M6 lock bolt (Item 8) in the square
mount on the top long handle and screw it
tight with the wing nut (Item 7).
3. Insert the long handle in the long handle
mount (Item 12). If necessary, slightly depress
the spring ball (Item 11) and carefully push
the long handle into the long handle mount.
The spring ball (Item 11) will latch in the hole
provided (Item 21).
4. Insert the M6 hex. screw (Item 9) in the screw
mount and turn the wing nut (Item 7) until it is
tight and secures the long handle in the long
handle mount.
Anl_GE_ST_36_40_Li_E_NA_SPK7.indb 12Anl_GE_ST_36_40_Li_E_NA_SPK7.indb 12 04.06.2024 14:36:5704.06.2024 14:36:57
Bekijk gratis de handleiding van Einhell GE-ST 36/40 Li E BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Einhell |
| Model | GE-ST 36/40 Li E BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5503 MB |
