Einhell DTA-P.40 handleiding
Handleiding
Je bekijkt pagina 4 van 36
GB
4
Dear Customer,
Before you use the stapler for the first time, please
read these instructions and note the information for
the tool’s operation and maintenance.
Always keep this manual with the tool.
1. Items supplied
DTA 25 DTA-P 40
1 pneumatic stapler
1 plug-in R 1/4”
1 socket-wrench 3 mm 3 mm
1 socket-wrench 4 mm 4 mm
1 socket-wrench 5 mm
2. Technical data
DTA 25 DTA-P 40
Permissible working
pressure max. 6 bar 6 bar
Air consumption approx. 0.11 l/min. 0.22 L/min.
Staple width 5 mm 5.7 mm
Staple length 8 - 25 mm 19 - 40 mm
Recommended hose
diameter 9 mm i Ø 9 mm i Ø
Air quality cleaned and oiled
Compressor capacity
approx. 250 l/min. equivalent to a motor
rating of 2.2 kW
Work settings
6 bar working pressure set at the pressure reducer
or filter pressure reducer
Please note:
When working with the stapler, be sure to wear
the necessary protective clothing, particularly
goggles.
Observe the safety regulations.
3. Illustration
Item. Description
A trigger lever
B magazine
C magazine lever
D plug-in nipple for the air supply
E air connection
4. Proper use
The stapler is a pneumatic tool for universal service.
The exhaust air leaves the housing to the front.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.
A
A
E
D
C
D
E
C
B
B
DTA-P 40
DTA 25
Anleitung DTA 25 und DTA-P 40 13.11.2001 7:38 Uhr Seite 4
Bekijk gratis de handleiding van Einhell DTA-P.40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Einhell |
| Model | DTA-P.40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5055 MB |
