Eibenstock TwinMix 1800 T handleiding
Handleiding
Je bekijkt pagina 20 van 52
20
Mixing paddle (B):
The stirrer (9) always must be removed first for change of the mixing
paddle (10).
For change of the mixing paddle (10), use an Allen key SW6 to loosen the
two cheese-head screws M8x20.
Care and Maintenance
Before the beginning of maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel. After every repair the machine has to be inspected by an
electric specialist. Due to its design, the machine needs a minimum of care
and maintenance. However, the following points always have to be
observed:
Keep the machine and the controls clean and functional.
To clean the mixing tools, tilt the mixing station to the rear and rest it on
the handles (3). Take care that no water enters into the motor during
cleaning.
Always keep the power tool and the ventilation slots clean.
During work, please pay attention that no particles get inside the
machine.
Use only the original mixing bucket from Eibenstock as replacement for
a worn mixing bucket. Correct function is guaranteed only with this
mixing bucket.
In case of failure, a repair has to be carried out by an authorised
service workshop.
Our after-sales service responds to your questions concerning
maintenance and repair of your product as well as spare parts.
EIBENSTOCK’s application service team will gladly answer questions
concerning our products and their accessories.
A
B
B
Bekijk gratis de handleiding van Eibenstock TwinMix 1800 T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | TwinMix 1800 T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6971 MB |
