Eibenstock PL 200 handleiding
Handleiding
Je bekijkt pagina 20 van 100
20
Do not use the machine if a part of the housing is damaged or in case
of damages on the switch, the connecting cable or plug.
Power tools have to be inspected visually by a specialist in regular
intervals.
Always lead the cable to the back, away from the machine.
When using the drill, cooling water is never allowed to get into the
motor and electrical parts.
Overhead-drillings only with suitable safety measures (water collection).
After an interruption of your work, only switch the machine on again
after having checked that the drill bit can be turned freely.
The tool may be used with the drill rig only.
Do not touch rotating parts.
Persons under 16 years of age are not allowed to use the tool.
During use, the user and other persons standing nearby have to wear
suitable ear protectors, goggles, helmets, protective gloves and boots.
Always work concentrated and carefully. Do not use the tool when
you are lacking in concentration.
For further safety instructions, please refer to the enclosure!
Electrical Connection
The PL 200 is made in protection class I. For protection purposes the
machine can only be run with a GFCI. For this reason, the machine is
standard equipped with a PRCD switch integrated in the cord which allows
to connect the unit directly with a grounded socket.
!
Attention!
The PRCD-protective switch must not lay in water.
PRCD-protective switches must not be used to switch
the tool on and off.
Before you start working, check the proper
functioning by pressing the TEST button.
When connecting to a household current network protected with 16 A, we
recommend the use of a starting current limiter as intermediate plug.
Only use 3-wire extension cable with protecting conductor and a sufficient
cross-section (min. 2.5 mm
2
). A cross-section which is too small could lead
to an excessive power loss and to overheating of machine and cable.
First, check the correspondence of voltage and frequency and compare it
with the data mentioned on the identification plate. Voltage differences from
+6 % to -10 % are allowed.
Bekijk gratis de handleiding van Eibenstock PL 200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | PL 200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11544 MB |
