Eibenstock DSE 200 handleiding
Handleiding
Je bekijkt pagina 23 van 156
23
When restarting a diamond drill in the workpiece check that the bit
rotates freely before starting. If the bit is jammed, it may not start, may
overload the tool, or may cause the diamond drill to release from the
workpiece
The tool may be used with the drill rig only.
Ensure that the drill is securely attached to the drill stand before using
it. Otherwise, the drill may slip in the drill stand, which can lead to a loss
of control.
Secure the drill stand on a stable and even surface. If there is a chance
that the drill stand will slip or wobble, the safe and steady operation of
the drill cannot be guaranteed.
When securing the drill stand with anchors and fasteners to the
workpiece, ensure that the anchoring used is capable of holding and
restraining the machine during use. If the workpiece is weak or porous,
the anchor may pull out causing the drill stand to release from the
workpiece.
Always fasten the drill stand while in operation, using anchors or quick-
clamping column (accessory) to prevent accidental tipping of the drill
stand with inserted diamond drill and core bit.
Do not overload the drill unit or climb or stand on it. Overloading or
standing on the drill unit can raise ist centre of gravity, causing it to tip
over.
When performing drilling that requires the use of water, route the water
away from the operator’s work area or use a liquid collection device.
Such precautionary measures keep the operator’s work area dry and
reduce the risk of electrical shock.
Do not use this tool for overhead drilling with water supply. Water
entering the power tool will increase the risk of electric shock.
Do not touch rotating parts.
Never leave the tool unattended before it has come to a complete stop.
Cutting tools that are still running can cause injuries.
Store idle the drill unit out of the reach of children. Do not allow persons
unfamiliar with the tool or these instructions to operate the tool. Tools
can be dangerous in the hands of untrained users.
Persons under 16 years of age are not allowed to use the tool.
During use, the user and other persons standing nearby have to wear
suitable ear protectors, goggles, helmets, protective gloves and boots
Always work concentrated and carefully. Do not use the tool when
you are lacking in concentration.
For further safety instructions, please refer to the enclosure!
Bekijk gratis de handleiding van Eibenstock DSE 200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | DSE 200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28035 MB |
