Eibenstock DBE 352 handleiding
Handleiding
Je bekijkt pagina 24 van 234
24
Make sure that you always can overlook the work place in a sufficient
way and that you always can reach all necessary control elements
and safety devices.
In order to avoid accidents, keep other persons away from your work
place.
Required space for operation and maintenance
If possible, make sure that you have enough free space for operation and
maintenance around the machine (about 2 metres). This way, you can work
safely and in case of operating trouble you can intervene immediately.
Preparation
When you drill into blocs, make sure that the blocs are well anchored
and fixed.
Before drilling in supporting parts, make sure that you do not
disregard the statics. Observe the instructions of the experts who are
responsible for the design.
Make sure that you do not damage any gas mains, water mains or
electric cables while drilling.
Pay attention that you do not touch any metallic parts of the machine
when you drill walls and grounds where electric cables could lie under
water.
Pay attention that the drilling core does not hurt anybody or damaging
anything when it drops out.
If the drilling core might cause any damage when it drops out, use an
device that can hold back the drilling core.
Make sure that the drill bit is well fixed.
Only use tools which are suitable for the particular material.
Fastening of the Drill Rig
The diamond core drill EBM 352/3 may only be used mounted on a drill rig.
Since the drill rig is not included in the delivery, we point out some important
kinds of assembly.
For this purpose, please refer to the drill rig’s operating instructions.
Vacuum fastening:
For the vacuum, make sure that it is sufficient (minimum -0.8 bar). Make
sure that the gaskets are not worn.
Attention! Do not use the vacuum fastening on the wall or overhead!
Please ensure that the leveling screws are adjusted in such a way that they
do not protrude from the underside of the drill stand foot, otherwise the
vacuum is affected and the stand may come away from its support.
Dowel fastening:
The most common way of fastening is dowel fixing.
Bekijk gratis de handleiding van Eibenstock DBE 352, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | DBE 352 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 41871 MB |
