Eibenstock DBE 352 handleiding
Handleiding
Je bekijkt pagina 21 van 234
21
After an interruption of your work, only switch the machine on again after
having checked that the drill bit can be turned freely.
The tool may be used with the drill rig only.
Do not touch rotating parts.
Persons under 16 years of age are not allowed to use the tool.
During use, the user and other persons standing nearby have to wear
suitable ear protectors, goggles, helmets, protective gloves and boots.
Always work concentrated and carefully. Do not use the tool when
you are lacking in concentration.
For further safety instructions, please refer to the enclosure!
Fixing to Drill Rig
Fasten the gearing foot of the
EBM 352/3 by means of four M 8 Allen
screws to the drill rig.
The drill stand should have a good
stiffness and precise guide ways. The
spindle of the machine needs to go
parallel to the axle of the drill stand.
Use only fall-safe drill rigs.
It is advisable to use a water-collecting
ring.
The EBM 352/3 is equipped with a
transport handle which makes the
transport of the core drill and inserting in
the drill rig reception easier.
Electrical Connection
The EBM 352/3 is made in protection class I. In order to protect the
operator, the machine can only be run with a GFCI. For this reason, the
machine is standard equipped with a PRCD switch integrated in the cord
which allows to connect the unit directly with a grounded socket.
79,5
98
41,3
10
M
8
x
1
6
Bekijk gratis de handleiding van Eibenstock DBE 352, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | DBE 352 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 41871 MB |
