Eibenstock BST 125 V handleiding
Handleiding
Je bekijkt pagina 15 van 32
15
Operations
In order to operate the tool safely, please observe the following notes:
Details of the work area
Keep the work area free of everything which could obstruct operations.
Provide for adequate illumination of the work area.
Adhere to the regulations concerning the power connection.
Lay the power cable in such a way that any damage by the drill can be
avoided.
Make sure to always keep the work area in view and to be able to reach all
necessary operating elements and safety installations.
Keep other persons away from your work area in order to avoid accidents.
Space requirements for operating and maintenance
Whenever possible, keep a free space for operating and maintenance of about
2 m around the drill position, so that you can work safely and have immediate
access in case of a failure.
Drilling
Adjust the speed, which is correct for the drill bit diameter, on the adjusting
wheel and switch the machine on. The amount of water can be regulated via
the mini ball valve at the pump. Do not start working until enough water is
running from the drill bit.
Drill very slowly at the beginning, as the drill bit only engages the material
with a fraction of its cutting surface. If you drill too fast or with too high a
pressure, the crown may run or the workpiece may break.
Close the water supply and switch the machine off.
Attention!
The drill bit has a lag when you have switched the machine off.
When removing the tile, please pay attention that its
drilled edges are sharp.
You could cut yourself.
Wear protective gloves!
Care and Maintenance
Make sure that the vacuum feet is working properly before each use.
Pay particular attention to the rubber pad. It must be undamaged and not
cracked in any way.
Before each use, check the rubber pad for potential functional limitations
due to reduced elasticity, e.g. due to ageing, wear, improper maintenance
or storage.
Replace the damaged vacuum feets or vakuum feets with reduced holding
capacity immediately.
Bekijk gratis de handleiding van Eibenstock BST 125 V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | BST 125 V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5275 MB |
